Laser engraving machine is a kind of equipment that is used more in the advertising industry. It mainly processes various advertising materials, but we all know that laser engraving machines will run into unexpected situations that we all unexpected. Let me introduce below. Some problems and solutions of the laser control machine's motion control failure.
First, let's take a look at the reasons and solutions for the laser head in four directions:
1) The crash caused the laser to not move in all four directions. The solution is to restart and restart the computer.
2) The laser driver cannot move in all four directions due to the incorrect connection of the motor driver. The solution is to check the driver wiring.
3) The DC power supply does not meet the standards, and the laser cannot move in all four directions. The solution is to repair or directly replace the DC power supply.
4) The driver fails to move the laser in all four directions. The solution is to repair the drive or replace the drive
Second, let's find out why the big and small cars make a lot of noise during the movement and the solution:
Second, let's find out why the big and small cars make a lot of noise during the movement and the solution:
1) Improper tightening of the timing belt will cause a lot of noise when the big and small cars move. The solution is to adjust the timing belt tension.
2) When the slider and the guide rail have too much friction, a large noise will be generated when the car moves. The solution is to regularly apply the high-grade lubricant to the guide rails. Of course, you can't leave it for a long time if you apply more points each time.
3) When the timing belt is wiped by the timing wheel or the smooth wheel, it will produce a lot of noise. The solution is to adjust the timing belt, timing belt wheel, and light wheel.
Finally, let's take a look at the problem of collision or bald head in a certain direction and the solution:
1) The moving optical head exceeds the set range due to the long-distance moving optical head. The solution is origin correction.
2) The movement of the optical head is beyond the set range due to the absence of the origin setting function. The solution is to reset the range and correct the origin.
3) There is a problem with the proximity switch and the optical head cannot move to a certain direction. The solution is to detect and repair the proximity switch.
